Easy Home Repairs

Some of the hardest parts of any home repair job involve making sure that everything needed is present and that the area is prepared properly. Home owners often do not perform a basic check list before making some simple repairs, which ends up making the job longer than it has to be, or even making the house worse than it was before the job was started. Here are five common jobs that can be done around the house that often need to be done maytag washer repair pasadena.

Painting

Painting is the easiest way to effectively update or improve the look of a room. No matter how small or large the job is, painting can help a room look more attractive because a bad paint job results in the room looking shabby, which brings down the quality of the house. Prepping the area involves removing and furniture and fixtures that could get paint spilled on them. Remove curtain rods, door hinges and switch-plates. Cover all baseboard and all light switches with duct tape in order to protect them from the paint. At the end of the job, recycle the paint instead of throwing it away.

Door Maintenance

A door can make squeaking sounds as well as stick so that it will not open. Indoor as well as outdoor entrances can do this just the same. Wooden doors located inside the house can swell in humid weather and contract in cold weather. Before adjusting the planes on the sides of the door, make sure to properly prepare the area. Get a carpenter’s plane in order to shave wood off the planes in order to make the door fit. A hammer and screwdriver may be necessary in order to remove the hinges.

Caulking

Caulk is what holds the tiles inside a shower together, the rim of a bathtub to the wall, or the outer edge of toilet to the floor. Unfortunately, moisture can also eat away at caulk over time, which makes replacing it necessary. Before replacing it, make sure that there is no moisture to speak of in the bathroom in question. It is imperative that moisture does not get behind the rim of the bathtub because that is what gives the impetus for mould to grow, which is the death knell for any room in the house.

Tap Washer Repair

Replacing a tap washer is necessary because water, being the universal solvent, eats away at the plastic the washer is made of. This not only annoying, but potentially dangerous; a leaky faucet can waste a lot of water each year. Get the necessary tools, such as a hammer, a screwdriver, etc. before beginning.

Toilet Clogs

Perhaps the most annoying part of any home repair is unclogging the toilet. Using a plunger will often take care of this problem.

My Dryer is Tearing My Clothes

I took some clothes out of the dryer the other day and noticed that one of my shirts was torn and my favorite t-shirt had a hole in it. Since the shirts were fine when they went in the dryer and ruined when they came out, I figured it must have something to do with the dryer. I called a service technician to find out why my dryer was damaging my clothes.

What I found out was surprising, and if I knew then what I know now, I could have diagnosed and repaired the problem myself. So here’s the inside scoop if you have the same problem and would like to save your clothes and a few dollars ge dryer repair pasadena.

If your dryer is tearing your clothes, you need to check three parts; the drum glides, the drum seals, and the drum support rollers. To check these parts, open the dryer’s cabinet by removing the front or rear panel. Remember to disconnect the power to your dryer before beginning any repairs.

The glides support the drum and are located at the top or bottom of the bulkhead (the bulkhead is located at the front of the drum). When the glides wear, the drum tilts to the front of the dryer creating a pinch point between the top of the drum and the dryer wall. Your clothes can be torn if they get caught in this pinch point.

Glides are not difficult to replace. They are held in place by screws, rivets, or grooves. It’s best to replace all of the glides – they can be worn out even though they look fine.

Having checked the glides, now check the drum seals. They are located around the circumference of the drum and keep clothes from getting trapped between the drum and the dryer wall. Your clothes can be torn if they get caught between the spinning drum and the dryer wall.

Not all dryers have two drum seals. Some dryers have one seal.

Examine the seal for signs of wear or damage. You don’t need to remove the drum to check the entire seal, but you do need to remove the drum belt to relieve the tension on the drum. After removing the belt, turn the drum and examine the seal.

If the seal is worn it’s not difficult to remove, but it takes some effort. The seal is secured to the drum with an adhesive. Before you replace the seal, make sure you have the adhesive you need – not all seals come with adhesive.

To replace the seal, remove the drum from the dryer’s cabinet. With the drum removed, peel back the seal and scrape off the old adhesive. Scrape off as much adhesive as you can because the new seal bonds better to a clean surface.

Place the new seal, stitch side down, in the same position as the one you scraped off. Apply a small amount of adhesive under the entire edge of the seal. Allow the adhesive to dry for a few hours before reinstalling the drum.

While waiting for the adhesive to dry, check the rollers located at the back of the dryer, underneath the drum. If the rollers are worn, you dryer’s drum will tilt, creating a pinch point between the drum and the dryer wall. Your clothes can be torn if they get caught in this pinch point.

The left roller tends to wear more than the right one but you need to replace both to keep the drum from tilting. It’s easy to replace a roller because you only have to remove a screw or clip. Your new rollers may come with lubricating oil. Apply one drop of oil to the hub (center of the roller). Too much oil will only attract dust and lint and limit the life of your rollers.

FAQ About Cleaning and Repairing Dryer Ducts

If you haven’t had your dryer vent cleaned recently, you may want to rectify the situation as a clogged duct is a hazard to you and your family. This matter can be fixed if you hire an expert to rectify the issue. Here are some of the most common questions about this type of cleaning and repairs:

How often should my dryer vent be cleaned?
You should have a thorough cleaning done at least every two years. Factors determining this include the length of the vent, how many turns it has and how often the dryer is used. A dryer with a short vent and is used little may be able to go without cleaning longer than normal, while those who use the appliance on a regular basis might need a yearly cleaning lg dryer repair pasadena.

Why should I get my dryer vent cleaned?
Cleaning it lifts a huge safety risk that weighs on you and your family. Dryer fires are usually the cause of a dirty or improperly installed vent. Another risk from dirty vents is carbon monoxide gas buildup.

A proper cleaning will save you on the cost of electric or gas. A spotless pipe will allow the appliance to move the proper amount of air through the system, allowing your clothes to dry at a faster rate without using extra power.

How will I know it’s time for a cleaning?
Your dryer will leave a few tell tale signs. If you notice a significant change in drying times, if you can’t feel air blowing from the vent outside from at least a foot or if you see lots of lint starting to collect, then you need to get it cleaned.

Is there a difference between vinyl and metal hoses?
Aluminum hoses have a much higher temperature range, and they do not deteriorate like vinyl hoses. Maybe most importantly, aluminum hoses are also fireproof.

Is a longer hose better than a short one?
A shorter run is more efficient, as it doesn’t clog up as fast with lint and costs less to clean, while a longer hose run will have your dryer working harder.

How should I protect my dryer vent from intrusion?
There are covers available for purchase. One of the most common ways is to cover it with mesh, but this creates a fire hazard, so experts don’t recommended you do this.

My dryer smells like smoke whenever I turn it on.
The lint is probably getting trapped behind the dryer tumbler, and this is because your hose is jammed with lint or other debris. The lint gets trapped on the tumbler and the heating element dries it out, causing it to catch fire. Have your vent cleaned immediately.

Why is my hose collecting water?
Most likely because the hose has a sag. This sag is causing condensation to collect more water over time. Water will lead to rust and sludge, so have it fixed ASAP.

Should I remove the back of the dryer to clean the vent?
You should really call a professional to have your vent cleaned. It is not recommended you remove the back of the dryer.

Can I vent my dryer to the basement?
You should never vent it to an indoor space, as the heat and moisture will result in mold growth. Always have your dryer vented outside.

Repair Your Clothes Dryer

There are electrical appliances all over the home today; probably more than are needed. If it’s a kitchen appliance, chances are that it has a digital clock integrated into it. Even some dryers have clocks. Who needs that many clocks? They’re power vampires.

The Clothes Dryer as a Labor Saver

But make no mistake, appliances make life easier. One of the most useful is the clothes dryer. The days of clothes lines and clothes pins have been over for years now because of this useful device whirlpool dryer repair pasadena.

But like anything else, things can and will go wrong with it. Repairs are expensive when a professional appliance repairman pays a diagnostic visit. But any homeowner can repair a clothes dryer and save money. All it takes is a little laundry appliance troubleshooting.

Problem – Clothes Dryer is not Heating

If the dryer will tumble but it does not get hot, the problem is most likely the heating element. The modern clothes dryer is a remarkably simple contraption. All models will vary in their construction and layout; most drawings can be found with an Internet search.

Once the interior location of the heating element is found, it’s a simple matter to get to it and do a visual inspection. Be sure to unplug the dryer or flip the circuit breaker before going in!

If the break in the element can be seen, the diagnosis is complete. If it can’t be seen the problem might still be there.

Troubleshooting with a Digital Multimeter

There are two electrical leads on the element, one at each end of the heating element. A digital multimeter can be used to test for continuity, or, uninterrupted electrical flow.

If this is the problem, it’s a simple matter to replace the clothes dryer’s heating element. Get a replacement heating element, remove the old one (the electrical connections and a couple of screws), and install the new one.

The problem I had when replacing mine was that none of the local shops would sell me any dryer parts; they wanted to send one of their appliance service techs out to replace it. But isn’t this what I was trying to avoid in the first place?

Solution: I ordered one on-line from an appliance parts specialty vendor. They had the replacement heating element in stock and mailed it to me lickety-split; fifteen minutes later I was back in business!

 

Major Appliance Repair is a Win-Win For Your Home Life and Your Pocketbook

Professional appliance repair can help you save money and keep your household running smoothly. When you’re dealing with broken appliances, contact your local appliance repairman for quality service and great savings.

We rely on all kinds of appliances in our homes Refrigerator Repair Los Angeles. So, when one of them isn’t working, it can be a drain on our time, energy and money. That’s where professional repair services come in. Major appliance repair isn’t something to be taken on by even the most intrepid DIY-er. Professionals can repair all sorts of appliances quickly and easily so that you can get your life back on track. Additionally, getting an appliance fixed means that you won’t have to pay for the extra energy costs often associated with a poorly functioning machine, and you’ll avoid the expense of replacing the item altogether.

Home appliances make our lives easier, more convenient and more streamlined. We can wash and dry our clothes without lugging everything to a laundromat, we can clean our dishes without scrubbing every pot and pan by hand, and we can keep our food fresh without a second thought. However, when one of the appliances responsible for these functions stops working, our whole manner of life is thrown off. Whether you need a washer, dishwasher or refrigerator repair, appliance services experts will be able to quickly and efficiently identify the issue and resolve it, so that you can get your life back to normal with minimal fuss.

While the convenience of properly working appliances is a major point in favor of appliance repair, perhaps an even bigger benefit is the cost savings provided. When an appliance isn’t working right it can often eat up more energy than it should, which means that you’re paying more money for it to do less work. When you repair that appliance, you increase its energy efficiency, thus decreasing the cost of using it. On a larger scale, repairing an appliance instead of throwing it out and getting a new one represents a huge savings. If you opt for a dryer repair, for example, instead of buying a new dryer, you will easily save hundreds of dollars, but will still end up with a machine that works as well as it possibly can.

Are Compact Front Load Washer and Dryer Combination Machines Better?

Are you considering buying a new front load washer and dryer combo in compact size? With so many choices in the market today, you would want to be more vigilant in your search for an ideal washer. These machines are not expensive. Also, the cost of repair and maintenance are also not easy on the budget.

What is a Compact Front Load Washer and Dryer Combo?

This is one laundry machine with two uses Dryer Repair Los Angeles. It can be used to wash and dry your clothes. The difference between this machine and the stackable kind of washer and dryer is that you no longer have to transfer your clothes to the dryer drum once the washing cycle has finished. The machine transitions to the drying stage once the washing cycle is over. It is more convenient especially to those who can’t afford to shell out a lot of time in baby sitting their clothes.

The compact ones are often picked by those with smaller laundry areas. Although they have a small footprint, they usually have a fairly good drum capacity. You can still wash comforters and bed sheets using these compact machines.

Is This A Better Choice?

If you have limited laundry area and you are looking for a laundry machine that can make your laundry work a lot more convenient, this is a better choice. But is still boils down on your clothes washing requirements.

This is a good choice because it is cheaper than full-sized washers and dryers. It is also cheaper than buying separate washer and dryer. It does not take up a lot of space but it can still compete when it comes to the amount of clothes it can wash per cycle. Maintenance is easier because of it is a smaller machine to maintain. Moreover, you are only maintaining one machine.

This machine is also eco-friendly. Not only are you saving more water and energy, you are also saving more machine parts. As opposed to purchasing separate machines, this has lesser carbon footprint.

But just like other appliances, it is not without any downsides. If one of the functions breaks down, the whole machine breaks down. You have to fix both your washer and your dryer. Because it is a front loader, the cost for maintenance is more expensive than that maintenance cost for regular top loaders.

Choosing a good brand of washer and dryer combo should be at the top of your priority. Make sure you read reviews first so you can determine which brand of machine is reliable.

The Difference Between Home and Commercial Appliance Repair

Commercial business or restaurant owners have to understand the importance of hiring the services of a repair technician qualified to provide restaurant equipment repair. This way, they can ensure that they will not lose revenue while their appliances are being handled by unqualified people. There are companies that offer both commercial and residential appliance services, but not all repairmen are licensed to work with industrial appliances. Restaurant owners should always have access to a phone number of a repair technician that is qualified and licensed to do commercial repairs, because there is a great difference between regular home appliances and the ones used in the kitchen of a large restaurant. Considering the fact that Atlanta has over 35 million visitors each year and that many of these tourists are curious to try out the ethnic restaurants on Atlanta metro area, the potential loss of a restaurant owner operating in this area forced to close doors for the day. If a freezer stops functioning and the repair technician is not qualified and experienced in repairing commercial appliances, restaurants owners will lose revenue and the trust of its customers.

Atlanta’s most popular food establishment Maytag Appliance Repair Los Angeles, The Varsity, which is also the largest drive-in restaurant in the world, attracts millions of people every year. The tourists coming to Atlanta are always eager to eat authentic ethnic cuisine in the restaurant town in the gentrifying neighborhoods. Many restaurant owners in this area resort to commercial appliance repair in Atlanta to ensure that their business will thrive. Closing the restaurant even for a couple of hours results in huge losses in revenue in a city like Atlanta where restaurants are always full and visitors always eager to try the Southern cuisine. If the walk in freezer of a restaurant gets broken, the repair technician has to work fast to ensure that the food being kept there will not go bad making the restaurant suffer a great loses. Imagine the costs of replacing all the food, not to mention the blow such an incident will give to the reputation of that restaurant. This is why repair appliance technicians should be quailed in order to work efficiently and minimize the losses as much as possible.

The kitchen of a large restaurant such as The Varsity needs to be able to produce vast amounts of food in the quickest time possible. It is enough for one of the ovens to get broken for the entire production of food to get delayed. Restaurants have a reputation to keep, so having to make customers wait for their orders more than normal is inexcusable. Fast and reliable appliance services are important, because commercial appliances are more prone to wear and tear and need special maintenance. To cope with the challenge of preparing a great number of meals every day, the kitchen equipment has to work perfectly all the time, which means that the number for appliance repair in Atlanta is always on speed dial. Appliance technicians specializing in residential repairs would have difficulties understanding the requirements of commercial appliances.

Appliance Repair Manuals

One of the best ways to save money on repairs for your appliances is to do them yourself. Hiring a repairman can be very expensive, and bringing your appliances to repair shops would also mean additional costs in transporting them on top of the service fees that you have to pay. However, unlike simple home repairs like fixing the sink, repairing appliances is a more complicated process because tinkering with appliances means tinkering with complicated technology. As a result, you need the proper guidance before you begin to take your appliance apart. Fortunately, repair manuals can provide the appropriate guidance that you need to effectively repair your appliances Whirlpool Appliance Repair Los Angeles.

Sources of repair manuals

One of the best sources for repair manuals is the Internet because there are a number of web sites that offer them. Among these web sites are those of appliances manufacturers. They provide these repair manuals as a way of providing customer service to their customers. Usually, these manufacturers offer these manuals for free, which consumers can access either by having them shipped to them or by downloading a digital copy of the repair manual, which they can print. One of the advantages of getting repair manuals directly from the manufacturer is that you can get the exact information on the specific model of appliance that you want to repair.

However, there are also other web sites, which are usually do-it-yourself web sites, that offer repair manuals for some of the more common types of appliances, including refrigerators and dishwashers. Usually, these web sites sell these manuals to consumers. The average price for one manual is about $12 to $13, but you can avail yourself of discounts on these manuals when you buy more than one or if you buy the packages that these web sites offer.

One of the best ways to save on repairs is to do them yourself because when you do, all you need to pay for are the replacement parts that you need to install. However, repairing appliances can be very complicated because of the nature of these items. Fortunately, there are a number of good sources of information in the form of repair manuals from which you can get the appropriate guidance you need to be able to effectively repair your appliances.

DIY Dishwasher Repair

Maytag Whisper 300 Series dishwasher can be a wise investment for our homes. Keeping an automatic dishwasher not only makes our household chores simplified, but also helps saves your time for other more important tasks. This article contains useful tips and information on the proper ways of troubleshooting your Maytag dishwashers.

Cleaning up and washing the dishes after every meal can be a tiresome daily task. I say so; because personally dish washing is something I really do not enjoy doing. Thanks to my Maytag Quiet Series 300 dishwasher, I can now enjoy an extended time chatting with my family and not having to worry about the dishes. But because dishwashers are used repeatedly each and every day, it can’t help but get damaged easily. The following paragraphs below will help you handle some problems with your machine. This article contains various sections for troubleshooting a variety of problems.

Maytag manufactures the Whisper 300 series dishwashers Whirlpool Appliance Repair Los Angeles. The dishwashers have a limited one-year warranty that covers any defective part as long as the dishwasher is installed in a residential setting in the United States or Canada. During the warranty period, Maytag Services will repair or replace the dishwasher free of charge. Maytag recommends troubleshooting the dishwasher to resolve common problems before requesting warranty service.

Common Problem #1: Dishwasher Does Not Fill

1. Turn on the water supply and check household breakers or fuses. Reset or replace, if needed.

2. Remove the inlet hose and clean the water valve inlet to remove sediment. Remove kinks in the inlet hose.

3. Press the “Start/Cancel” button to start the selected dishwasher cycle.

4. Close and latch the door. The dishwasher will not start if the door in not properly latched.

Common Problem #2: Dishwasher Does not drain

1. Remove kinks in the drain hose.

2. Run the garbage disposal to empty it. If the dishwasher drains into a sink, run water into the sink to ensure the sink drain is not clogged. If it is clogged, pour liquid drain cleaner down the drain to remove clogs.

There are several things you should check before calling a dishwasher repair man to fix your appliance: the electricity and water supply, the control panel and the water supply hoses. Troubleshooting your appliance by eliminating common causes of technical issues takes about 20 minutes. So before calling your handy repairman for help and avoid unnecessary dishwasher repair expenses, try the above steps first. But if all else fails then it is time to call upon your most trusted dishwasher repairman.

Time to Change Parts of Appliances

There was a time when there were no options when it came to appliances. They would purchase their appliance or inherit it. Then they would keep it as long as possible. They would find the right appliance part to replace it or have an expert do the job. Then there was a time when some consumers found instead of getting appliance parts to repair an item they just purchased another appliance Jennair Appliance Repair Los Angeles.

Again people are noticing they can save a little money and a little time by getting repairs done. Sure not every repair is worth it. There are times when a needed repair costs almost or as much as purchasing a new item. Just do your research to help decide what is best for you.

One appliance part option is looking into refurbished appliances. These are when an appliance has been sent back to the manufacturer then repaired. They cost less since it is no longer new and has new appliance parts. Some repairs include rebuilding the motor or replacing the motor. It could also be that the appliance needs parts replaced because they are damaged or defective. The manufacture is making the appliance like new with new appliance parts.

When purchasing refurbished appliances they are often either still under a warranty or are given a new limited warranty. It doesn’t matter to some buyers if the appliance is new or refurbished. They just want to know it will work and they will get their money’s worth. Often when purchasing a new appliance or a refurbished appliance if something doesn’t work the warranty allows it to be repaired or replaced. They often try to repair it first. This is especially the case in minor issues. If it is a major issue then this is when a new appliance replaces the bad one and the bad one is sent back to be fixed or refurbished with appliance parts.

Purchasing a refurbished appliance that has had appliance parts replaced could concern some buyers even if there is a warranty. Sometimes it can be a major savings, but many not think is worth it. They might be nervous that at any time it could break. Only the buyer can determine what is best for them when it comes to purchasing new or refurbished appliances. The decision becomes even more difficult when it is a big appliance that is more expensive.